Using The Record Feature - Comdial DXP User Manual

GCA70–347

Using The Record Feature

The Record Feature enables you to record conversations and save them. (The
record feature must be enabled by a technical on a per-mailbox basis.)
Versatile Voice Processing allows you to listen to the recorded conversations
by accessing your mailbox and listening to the conversations as you would a
voice mail message.
1. When answer or make a call, one of the following displays appears:
Line 1
REC HOLD TRANS
Incoming Call Display
Ext 1021
REC
Intercom Call
2. Press the REC softkey to record the conversation into your mailbox
(depending on system programming, a recurring tone may sound to
indicate the call is being recorded) . The system will display the words
RECORDING, PAUSE, and STOP. You can pause or stop the
recording by pressing the appropriate softkey. If the system is unable
to record, it will display an error message for 2 seconds.
Small Office & VVP User's Guide
Line 1
CONF
Outgoing Call Display
Recording...
PAUSE STOP
Recording Call Display
Small Office & VVP User's Guide – 21
REC RLSE
Conference
REC
Conference Call