Using Recall/Flash - Comdial DSU II User Manual

9. USING RECALL/FLASH

The reaction of your telephone depends on how it was programmed
by the installer. When you access an outside line using the line group
feature and then flash the telephone hookswitch, your telephone will
react in one of the following ways.
• Obtain intercom dial tone
• Recall outside line dial tone
• Access outside features.
If the installer programmed the telephone to recall outside line dial
tone or to flash for outside features, you cannot obtain intercom dial
tone while on an outside line.
If the installer programmed the telephone to obtain intercom dial
tone, you can either recall outside dial tone or flash for outside fea-
tures (depending on system programming) by performing the fol-
lowing step:
—while on an outside line, FLASH the hookswitch and dial * 08.
September, 02
Industry Standard Telephone User's Guide
Comdial 17