Responding To Tracker Pager Calls - Comdial DSU II User Manual

Using The Tracker Paging System
• To use Tracker to transfer a call to a park orbit for retrieval
and transmit the call's park orbit code and caller ID
information (if available)
1. Answer a call.
2. FLASH the hookswitch.
3. Dial station number of station that is to receive the call.
4. If the user at the called station does not answer or the station is
busy, dial * 8.
5. Hear confirmation beep (Tracker page accepted) or busy tone
(Tracker page not accepted).
6. Hang up handset.
Tracker parked calls will re-ring your station if the called
party does not respond within a preprogrammed time. You can
either replace the call into another Tracker page orbit or
retrieve the call for servicing.
• To retrieve a call that you parked using the Tracker option
—Lift handset and FLASH the hookswitch,
– OR –
—Lift handset, listen for dial tone, and dial # #.

12.1 Responding To Tracker Pager Calls

• If you receive a parked call message on your Tracker pager
1. Go to any system station.
2. Lift handset and listen for intercom dial tone.
3. Dial the orbit code (#800–#899) displayed on your pager.
4. Retrieve call.
24 Comdial September, 02