Using The Tracker Paging System - Comdial DSU II User Manual

12. USING THE TRACKER PAGING
SYSTEM
The Tracker Pager System option allows you to send call back and
parked call messages to Tracker pagers assigned to station numbers.
If you have a Tracker pager assigned to your personal intercom
number, you can receive messages that someone else sends you. The
system automatically installs the Tracker pager for your use;
however, you can disable it when you do not wish to receive paged
messages and when you leave at the end of your day. If you do disable
your Tracker pager at the end of your day, be sure to enable it at the
beginning of your next day.
• To track a called party after receiving a ring-no answer
1. Make an intercom call to someone and receive no answer.
2. Dial * 8.
3. Hear confirmation beep (Tracker page accepted) or hear busy
tone (Tracker page not accepted).
4. Hang up handset.
• To track a called party without first calling them
1. Lift handset and listen for intercom dial tone.
2. Dial * 8.
3. Dial station number.
4. Hear confirmation beep (Tracker page accepted) or hear busy
tone (Tracker page not accepted).
5. Hang up handset.
September, 02
Industry Standard Telephone User's Guide
Comdial 23