Table of Contents
Advertisement
Feature
Operation
If your system has been configured
for recall,
l
Press TAP to disconnect
(as if you had hung up),
and obtain a new dial tone for another call.
NOTE:
System
can be configured
for recall or tap, but
not for both.
POSITIVE DISCONNECT/RECALL
l
If the hookswitch
in the handset cradle is pressed
and released
while the handset
is off-hook,
a
timed disconnect
of the active line is performed.
This feature retains the dial tone recall feature for
use
on
stations
where
the
TAP
key
is
programmed
to provide a "TAP" feature.
l
When the handset is hung up after a call is com-
pleted,
positive
disconnect
prevents
false
ring-
back from the host system.
ALL-CALL PAGING
For voice announce
paging
to all Solo stations
on the intercom
link via the station speaker,
l
Press ITCM.
l
Lift handset.
NOTE:
Station
disconnects
if handset
is not Med.
l
Press ALL-CALL
key (this is the station number
memory
key (in memory
key field) for your sta-
tion.)
l
Make announcement.
l
Hang up handset.
DO NOT DISTURB
To silence your ringer and block incoming
voice announcing,
l
Press MONITOR
(monitor light turns on).
NOTE:
The incoming
call will still flash the line key
light.
To cancel
do not disturb,
l
Press MONITOR again (monitor light turns off).
Advertisement
Table of Contents
