Using The Messaging Feature - Comdial DSU II User Manual

8. USING THE MESSAGING FEATURE

• Using Message Waiting Control
Only the person who sent the message and the person receiv-
ing the message can turn off the message-waiting light.
• To turn on the message-waiting light and broken dial tone at
a telephone
Message Wait Stutter Dial Tone must be enabled in Class of
Service programming for the target station.
1. Dial * 3.
2. Dial station number of the telephone you want to alert. The
message-waiting light of that station will flash.
• To turn off the message-waiting light and broken dial tone at
a busy or idle station
1. Dial # 3.
2. Dial station number of the telephone you alerted. The message-
waiting light of that station will turn off.
• To retrieve a message at an alerted station
1. Observe flashing message waiting light or hear broken dial
tone.
2. Lift handset.
3. Dial # 00.
Due to differences in system programming, you may have to
retrieve messages by obtaining intercom dial tone and dialing
the operator's station number.
September, 02
Industry Standard Telephone User's Guide
Comdial 15