Using The Recall/Flash Feature; Using Toll Restriction Override - Comdial DSU Series User Manual

GCA70–281

7.16 Using the Recall/Flash Feature

•
If your system has been configured for flash,
1. Press TAP to generate a timed flash signal while on line.
•
If your system has been configured for recall,
1. Press TAP to disconnect as if you had hung up.

7.17 Using Toll Restriction Override

•
To use Toll Restriction Override at a station,
1. Press INTERCOM.
2. Dial 6.
3. Dial your station extension number.
4. Dial your TRO code number (TRO code is not displayed —
instead an is shown).
5. Within 15-second timeout period, dial desired outgoing line
number.
6. Hang up handset or press SPEAKER to end call. You will have 15
seconds in which you can make another call without re-entering
your TRO code.
•
To clear the Toll Restriction Override code,
1. Press INTERCOM.
2. Dial 6.
3. Press SPEAKER.
Using The Other Telephone Features
LCD Speakerphone Station User's Guide 7 – 13