Comdial and FXT Owner's Manual page 67

GCA70-349
6. SELECT EDIT.
7. Make your speed dial route selection choice
from the list on the LCD by pressing the appro-
priate button.
•
•
•
•
NOTE: You may need a pause between numbers to compensate for differ-
ences in response time between your system and the host system (ask your
attendant about this). To store a pause, press HOLD, then continue dialing. If
your system is behind a host system that needs a hookflash to access a
feature, press TAP to store a hookflash, then continue dialing.
8. DIAL number (up to 16 digits long, include *
and # if needed).
9. SELECT DONE to store the number.
10. REPEAT previous steps until all numbers are
stored, OR SELECT EXIT .
11. PRESS SPEAKER to end.
Large Screen Display Speakerphone Station User's Guide
PRESS line button to select outside line,
DIAL to select prime line or last line
used.
DIAL to
group.
PRESS INTERCOM button or dial
lect intercom.
to select line
to se-
Programming
Select Line
Select Line Group
Select Prime/Last Line
Select Intercom
ARS
EXIT PREV
Selecting Line or Intercom
0123456789*#
Pause (p)
Flash (f)
ENTER ERASE DONE
Dialing a Speed Number
59