Using Lcd Messaging - Comdial DXP Plus Series User Manual

Sending And Receiving Non-Verbal Messages
5.2

Using LCD Messaging

NOTE: You can set system-supplied messages to display at any calling
LCD speakerphone.
To turn on LCD messaging,
1. Press INTERCOM.
2. Dial 02.
3. Press # to clear current message if you have one stored.
4. Dial message code number (01–30).
5. Press # and then press SPEAKER to end message.
6. INTERCOM light flashes.
To turn off LCD messaging and your INTERCOM light,
1. Press INTERCOM.
2. Dial # 02.
5 – 2 LCD Speakerphone Station User's Guide
GCA70–258