Reading An Image Plate - AGFA CR 75.0 Reference Manual

Reading an image plate

The main function of the CR 75.0 is digitizing image plates and transmitting
the digital image data to the preview station and the image processing
station.
To read one or more image plates:
1
Make sure the cassette has been properly identified via the ID Station.
Refer to the User manual of the ID Software.
2
Check that the CR 75.0 is ready for operation:
•
the CR 75.0 must display the operator screen with 'Ready' or 'Busy' status.
VIPS not ready
CR 75.0
•
the status indicator at the top of the CR 75.0 must be constant or flashing green.
# The CR 75.0 is operational if the status field equals 'READY', even if
status messages of the destination are shown (e.g. 'VIPS not ready').
3
Place one or more cassettes in the input buffer.
You can insert up to 10 cassettes, even of different sizes. Make sure that the
cassette opening mechanism is at the bottom.
28
READY Status field
2241A EN 20040210