Table of Contents
Advertisement
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
"
CAUTION:
Make sure that all server power cords are disconnected from their power sources before performing
this procedure.
Before you install an M.2 drive, make sure that the retainer on the M.2 backplane is in the correct keyhole to
accommodate the size of the M.2 drive you are installing. See "M.2 backplane retainer adjustment" on page
166.
Complete the following steps to install an M.2 drive in the M.2 backplane.
Watch the procedure. A video of the installation process is available:
•
YouTube
•
Youku
"
Step 1.
Locate the connector on each side of the M.2 backplane.
Step 2.
Insert the M.2 drive.
Figure 92. Inserting the M.2 drives
Insert the M.2 drive at an angle (approximately 30 degrees) into the connector and rotate it until the
notch catches on the lip of the retainer
Notes:
User Guide for ThinkAgile VX7820 Appliance, ThinkAgile VX 4-Socket 4U Certified Node
168
" on page 89 "
" on page 91
" on page 65
Advertisement
Table of Contents
