Table of Contents
Advertisement
Figure 114. Processor locations on system board
Figure 115. Processor layout for multi-processor systems (viewed from front of server)
Complete the following steps to install a PHM.
Watch the procedure. A video of the installation process is available:
•
YouTube
•
Youku
Step 1.
Remove the processor socket cover, if one is installed on the processor socket, by placing your
fingers in the half-circles at each end of the cover and lifting it from the system board.
Step 2.
Install the processor-heat-sink module on the system board.
User Guide for ThinkAgile VX7820 Appliance, ThinkAgile VX 4-Socket 4U Certified Node
198
Advertisement
Table of Contents
