Table of Contents
Advertisement
PCIe
slot
Slot location
1
Riser 1
2
3
4
5
I/O tray
6
7
8 (ML2)
9 (LOM)
10
Riser 2
11
12
13
14
15 (ML2)
16
2x8 Riser
17
M.2
I/O tray
Storage
Upper tray
adapter
Storage
Lower tray
adapter
Notes:
1. In 2-processor configurations, processors 3 and 4 are not installed; this means slots 1-4, slot 10-13, and slot 16
are not connected.
2. In 3-processor configurations, processor 3 is not installed; this means slot 10-13, and slot 16 are not connected.
Drive bays
Drives are all located at the front of the server, 12 drives at the front of the upper tray and 12 at the front of
the lower tray. Drives are connected to 4-drive backplanes in a 2-by-2 configuration, as shown in the
following figure. All drive bays are 2.5-inch form factor.
Two different drive backplanes are available for the server:
• SAS/SATA backplane: Supports 4 SAS or SATA drives
• AnyBay backplane:
Description
4
1
Not connected for 2x16. Slots 1 and 2 are not connected if the 2x16 riser is used in
riser slot 1.
4
1
Not connected for 2x16. Slots 1 and 2 are not connected if the 2x16 riser is used in
riser slot 1.
4
1
4
1
2
2
1
1
1 (PCH)
3
2
3
2
3
2
3
2
Not connected.
Not connected.
3
2
1
1 (PCH)
Not connected.
1
.
Chapter 1
Introduction
13
Advertisement
Table of Contents
