Table of Contents
Advertisement
Figure 139. Storage tray removal to stop position
Step 1.
Press the button on each release lever; then, simultaneously rotate the release levers until they are
perpendicular to the chassis.
Step 2.
Pull storage tray forward evenly until it stops; then, close the release levers.
Step 3.
Press the release tabs on either side of the tray; then, slide the tray fully forward evenly and remove
it from the chassis.
Attention:
• Be prepared to support the full weight of the storage tray when you remove it from the chassis.
• Do not use the release levers as handles to support the storage tray.
Figure 140. Storage tray removal from chassis
.
Chapter 9
Hardware replacement procedures
233
Advertisement
Table of Contents
