Lenovo ThinkAgile VX7820 User Manual page 204

Table of Contents

Advertisement

Attention:
• Each processor socket must always contain a cover or a PHM. When removing or installing a PHM,
protect empty processor sockets with a cover.
• Do not touch the processor socket or processor contacts. Processor-socket contacts are very fragile and
easily damaged. Contaminants on the processor contacts, such as oil from your skin, can cause
connection failures.
• Remove and install only one PHM at a time. If the system board supports multiple processors, install the
PHMs starting with the first processor socket.
• Do not allow the thermal grease on the processor or heat sink to come in contact with anything. Contact
with any surface can compromise the thermal grease, rendering it ineffective. Thermal grease can damage
components, such as electrical connectors in the processor socket. Do not remove the grease cover from
a heat sink until you are instructed to do so.
Notes:
• PHMs are keyed for the socket where they can be installed and for their orientation in the socket.
• See
http://www.lenovo.com/us/en/serverproven/
processors on the system board must have the same speed, number of cores, and frequency.
• Before you install a new PHM or replacement processor, update your system firmware to the latest level.
See "Update the firmware" on page 68.
• Optional devices available for your system might have specific processor requirements. See the
documentation that comes with the optional device for information.
Before you install a PHM:
Note: The heat sink, processor, and processor retainer for your system might be different than those shown
in the illustrations.
1. Remove the existing PHM, if one is installed. See "Remove a processor and heat sink" on page 190.
Note: Replacement processors come with both rectangular and square processor retainers. A
rectangular retainer comes attached to the processor. The square retainer can be discarded.
2. If you are replacing a heat sink, replace the processor retainer. Processor retainers should not be reused.
a. Remove the old processor retainer.
User Guide for ThinkAgile VX7820 Appliance, ThinkAgile VX 4-Socket 4U Certified Node
194
for a list of processors supported for your server. All

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkagile vx 4-socket 4u certified node

Table of Contents