Id Scan/Id Search Mode; Temporarily Holding On A System; Holding On A Channel; Quickly Storing An Id During Id Search - Uniden BC246T Owner's Manual

You can also lock out an active channel by pressing L/O
while the scanner is stopped on the channel.

ID Scan/ID Search Mode

While you are scanning a trunked system, the scanner
can be in either ID Scan or ID Search mode:
• ID Scan – the scanner only stops on talk group ID's
that you have programmed into the system
• ID Search – the scanner stops on any unlocked talk
group that becomes active.
To toggle between ID Scan and ID Search, press Scan
while the scanner is scanning the system.

Temporarily Holding On a System

To temporarily hold on a system, press and hold
To hold on a different system, continue to hold
rotate the scroll control to select the system. Normal
scanning resumes 2 seconds after you release

Holding On a Channel

To hold on a channel, press Hold while the channel is
active. To select a different channel, rotate the scroll
control. If you scroll past the beginning or end of the
current system, the scanner selects channels in the
previous or next system. To resume scanning, press Scan.

Quickly Storing an ID During ID Search

To quickly store an active talk group ID during ID search,
press E. You see:
Quick TGID Save?
4128
To save the ID into a channel, press E. Otherwise, press
No. If you press E, the scanner stores the ID into a
channel group called Qck Save Grp in the current system.
Quick-Storing Channels or
Talk Group ID's
1. Hold on an existing channel in any system.
2. Enter the frequency or talk group ID you want to store
(press twice to enter hyphens in talk group ID's).
Basic Operation
44
.
Func
and
Func
.
Func