Fan Sensor Replacement - Fujitsu M2361A Customer Engineering Manual

6.6.11 Fan sensor replacement
Refer to Figure 6.6.10.
(1) Removal
CD
Remove the power amplifier PCB. (Refer to item (1) of subsection
6.6.8.)
(1)
Remove the 4 screws
"c"
holding the blower bracket.
Q)
Remove the 4 screws
"n"
holding the upper side of the line blower.
Caution: Take care not to drop the screws.
~
Remove the connector (CN71) that goes out from the fan sensor, and
remove the blower assembly.
CD
Remove the connector (CN91) that goes out from the line blower.
QV
Pull and remove the fan sensor.
(2) Installation
Follow in reverse order the procedure for removal.
4 Screw "0"
Blower Bracket
Line Blower Fan Sensor
Air Filter
2 Screws "B"
4 Screws
"e"
Figure 6.6.10 Blower assembly replacement
6 - 18
B03P-482S-0002A ••• 01