6.6.7
Interface PCB replacement
Inter face PCBs (basic and dual port) are installed in the interface card cage. Refer
to Figure 6.6.8.
(1)
Removal
QD
Remove the interface cables connected to the interface PCB.
CD
Remove the 2 screws holding the card fixture and then remove it.
CD
Pull up the interface PCB.
(2)
Installation
Follow, in reverse order, the procedures for removal.
Card Fixture
Screw
Interface (Dual)
\
\
Interface (Basic)
L - _ _ _ _ _ --'-_---'-_ _ _
Figure 6.6.8
Interface PCB replacement
6 - 14
B03P-4825-0002A ... OlA