Installing and removing a WLAN module (optional)
The WLAN module is also available as a board and is then installed like a
board (see
You can install an additional WLAN module in your device.
Operation of the module is not permitted in Taiwan.
Removing the front panel
•
Requirement: open the casing (see
To access the WLAN module bay, you first need to remove the front panel.
► Lift the locking lugs on the front panel (1).
► Fold the front panel in the direction of the arrow (2) and remove it from the casing.
Removing the front fan
•
Requirement: open the casing (see
•
Requirement: remove the front panel (see
To access the WLAN module bay, you need to remove the front fan after removing the front panel.
The front fan is secured using several locking hooks that will need to be unlocked one after the other.
► Disconnect the fan cable from the mainboard.
Fujitsu
"Installing and removing a board", Page
"Opening the casing", Page
"Opening the casing", Page
61).
1
2
1
1
"Removing the front panel", Page
System expansions
36).
36).
45).
45