Installing and removing a WLAN module (optional)
You can install an additional WLAN module in your device.
Removing the front panel
•
Requirement: open the casing (see
To access the WLAN module bay, you first need to remove the front panel.
► Lift the locking lugs on the front panel (1).
► Fold the front panel in the direction of the arrow (2) and remove it from the casing.
Removing the front fan
•
Requirement: open the casing (see
•
Requirement: remove the front panel (see
To access the WLAN module bay, you need to remove the front fan after removing the front panel.
The front fan is secured using several locking hooks that will need to be unlocked one after the other.
► Disconnect the fan cable from the mainboard.
Fujitsu Technology Solutions
"Opening the casing", Page
1
2
1
1
"Opening the casing", Page
"Removing the front panel", Page
System expansions
34).
34).
43).
43