Product Overview; Controls - Toro Z Master Professional 7000 Series Operator's Manual

Product Overview

1. Z Stand ©
2. Height-of-cut lever
3. Motion-control lever
4. Seat belt
5. Roll bar

Controls

Become familiar with all the controls before you start
the engine and operate the machine
Figure 4).
Figure 3
6. Fuel cap (both sides)
7. Parking-brake lever
8. Mower deck
9. Caster wheel
(Figure 3
1. Hour meter
2. Ignition switch
3. Fuel-selector valve
4. Audible alarm
5. Glow-plug switch
g020466
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance
Safety-Interlock Indicators
There are symbols on the hour meter and they indicate
and
with a black triangle that the interlock component is in
the correct position
Battery Indicator Light
When the ignition key is initially turned to the R
position for a few seconds, the battery voltage is
displayed in the area where the hours are normally
displayed.
The battery light turns on when the ignition is turned
on and when the charge is below the correct operating
level (Figure
14
Figure 4
6. Glow-plug light
7. Engine-temperature light
8. Throttle control
9. PTO Switch
(Figure 4).
(Figure 5).
5).
g010363
UN