Operating With The Overheat Sensor; Transporting The Machine; Loading The Machine - Toro Z Master Professional 7000 Series Operator's Manual

Operating with the Overheat
Sensor
This machine has a sensor that turns O
deck when the engine overheats. When the engine
overheats, the audible alarm and light alarm turns O
along with the mower deck turning O
If the mower deck turns O
of overheating, drive the machine to a safe area and
to a truck or trailer.
If the machine overheats, ensure that the area around
the engine and radiator is clear of any debris. Turn the
engine off and allow it to cool down before you engage
the mower deck. If the engine continues to overheat,
take your machine to an Authorized Service Dealer.

Transporting the Machine

Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
necessary lighting and marking as required by law.
Please carefully read all the safety instructions.
Knowing this information could help you, your family,
pets or bystanders avoid injury.
To transport the machine:
•
Lock the brake and block the wheels.
•
Securely fasten the machine to the trailer or truck
with straps, chains, cable, or ropes.
•
Secure a trailer to the towing vehicle with safety
chains.
WARNING
Driving on the street or roadway without
turn signals, lights, reflective markings,
or a slow moving vehicle emblem is
dangerous and can lead to accidents
causing personal injury.
Do not drive machine on a public street or
roadway.

Loading the Machine

Use extreme caution when loading or the unloading
machine onto a trailer or a truck. Use a full-width ramp
that is wider than the machine for this procedure.
Back the machine up the ramp and drive it forward
down the ramp (Figure
the mower
FF
.
FF
automatically because
FF
25).
N
1. Back the machine up the
ramp.
Important:
Do not use narrow individual ramps
for each side of the machine.
27
Figure 25
2. Drive the machine forward
down the ramp.
g028043