Konica Minolta Bizhub 4000i User Manual page 93

Home > Network > Additional Methods of Configuring Your Machine for a Wireless Network
®
Direct > Configure Your Wi-Fi Direct Network
of Wi-Fi Protected Setup
Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi
Protected Setup
>> bizhub 4000i
>> bizhub 5000i
bizhub 4000i
If your mobile device supports the PIN Method of Wi-Fi Protected Setup
a Wi-Fi Direct network.
1. Press a or b to select the [Network] option, and then press OK.
2. Press a or b to select the [Wi-Fi Direct] option, and then press OK.
3. Press a or b to select the [Group Owner] option, and then press OK.
4. Press a or b to select the [On] option, and then press OK.
5. Press a or b to select the [PIN Code] option, and then press OK.
6. When [Wi-Fi Direct On?] appears, press a to accept. To cancel, press b.
7. Activate your mobile device's WPS PIN configuration method when [Activate Wi-Fi Direct on
other device and press OK.] appears on the machine's LCD. Press OK on your machine.
This will start the Wi-Fi Direct setup. To cancel, press Cancel.
8. The machine will wait for a connection request from your mobile device. When [Input PIN Code]
appears, enter the PIN displayed on your mobile device in the machine.
9. Press OK.
10. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup.
bizhub 5000i
If your mobile device supports the PIN Method of Wi-Fi Protected Setup
a Wi-Fi Direct network.
1. Press [Settings] > [Network] > [Wi-Fi Direct] > [Group Owner].
2. Press [On].
3. Press a or b to select the [PIN Code], and then press [OK].
4. When [Wi-Fi Direct on?] appears, press [On] to accept. To cancel, press [Off].
5. Activate your mobile device's WPS PIN configuration method when [Activate Wi-Fi Direct on
other device. Then press [OK].] appears on the machine's LCD.
6. Press [OK] on your machine.
This will start the Wi-Fi Direct setup. To cancel, press
7. The machine will wait for a connection request from your mobile device. When [PIN Code] appears, enter
the PIN displayed on your mobile device in to the machine. Press [OK].
8. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup.
Related Information
• Configure Your Wi-Fi Direct Network
™
(WPS)
™
(WPS)
> Configure Your Wi-Fi Direct Network Using the PIN Method
.
™
(WPS), follow these steps to configure
™
(WPS), follow these steps to configure
> Use Wi-Fi
89