Konica Minolta Bizhub 4000i User Manual page 277

Level 1 Level 2
Interface
Auto IF Time
Input Buffer
Delete Storage Macro ID
Font ID
Format
[Print Menu]
Level 1 Level 2
Emulation
-
Auto Continue -
Paper Type -
Paper Size -
Copies -
Orientation
-
Print Position X Offset
Y Offset
Auto FF -
PCL Font No.
Font Pitch
Font Point
Symbol Set
Table Print
Auto LF
Auto CR
Auto WRAP
Auto SKIP
Left Margin
Right Margin
Top Margin
Bottom Margin Set the bottom margin distance from the bottom edge of the paper.
Lines
Tray Command
Epson FX-850 Font No.
Description
If you select Auto, the machine changes the interface to USB or Network
depending on which interface is receiving data.
Set the time-out period for the auto interface selection.
Increase or decrease the input buffer capacity.
Delete the registered Macro data.
Delete the registered Font data.
Restore the Macro and Font data of your machine to the default settings.
Description
Choose the emulation mode.
Select this setting if you want the machine to clear paper size errors or media
type errors, and use paper from other trays.
Set the type of paper.
Set the size of paper.
Set the number of printed pages.
Set pages to print in either portrait or landscape orientation.
Move the print start position (at the top-left corner of pages) horizontally up to
-500 (left) to +500 (right) dots in 300 dpi.
Move the print start position (at the top-left corner of pages) vertically up to
-500 (up) to +500 (down) dots in 300 dpi.
Allow the machine to print any remaining data automatically.
Set the font number.
Set the font pitch.
The Font Pitch menu appears when you choose I012 to I018, I031 to
I037 or I097 to I109 in Font No. setting.
Set the font size.
The Font Point menu appears when you choose I000 to I011, I019 to
I030 or I038 to I096 in Font No. setting.
Select the symbol or character set.
Print the code table.
ON: CR -> CR+LF, OFF: CR -> CR
ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Choose whether a line feed and carriage return will happen when the
machine reaches the right margin.
Choose whether a line feed and carriage return will happen when the carriage
position reaches the bottom margin.
Set the left margin at column 0 to 70 columns at 1 cpi.
Set the right margin at column 10 to 80 columns at 1 cpi.
Set the top margin distance from the top edge of the paper.
Set the number of lines on each page.
Select this setting if a tray mismatch appears when you use the HP drivers.
Set the font number.
273