Table of Contents
Advertisement
10. Turn the edge of the imaging unit toward you while looking at the drum surface to find the mark.
•
To avoid print quality problems, DO NOT touch the surface of the imaging unit, only the edge.
•
You can turn the imaging unit gear more easily by pulling down the black levers. When you have
finished turning the gear, push the levers back to the original position.
11. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.
NOTE
DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids.
12. Put the toner cartridge firmly into the imaging unit until you hear it lock into place.
251
- Quick Links:
- Replace the Toner Cartridge
Hide quick links:
Advertisement
Table of Contents
