Konica Minolta Bizhub 4000i User Manual page 280

Level 1 Level 2
Wi-Fi Direct Device Info.
Status Info.
I/F Enable
IPsec -
Network Reset -
1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel.
[Reset Menu]
Level 1 Description
Network Restore all network settings of your machine to the factory settings.
Factory Reset Reset the machine and restore the printer settings (including command settings) to the factory
settings.
Related Information
• Settings and Features Tables
Level 3 Description
Device Name View your machine's device name.
SSID Display the Group Owner's SSID.
IP Address
Display your machine's IP Address.
Status Display the Wi-Fi Direct network status.
Signal Display the current Wi-Fi Direct network signal strength.
When your machine acts as Group Owner, the LCD always
displays Strong.
Channel Display the channel in use when the Status is G/O
Active or Client Active.
Speed Display the connection speed when the Status is G/O
Active or Client Active.
- Enable or disable the Wi-Fi Direct connection.
- IPsec is an optional security feature of the IP protocol that
provides authentication and encryption services. We
recommend contacting your network administrator before
changing this setting.
- Restore all network settings of your machine to the factory
settings.
276