Konica Minolta Bizhub 4000i User Manual page 284

Level 2 Level 3
Epson FX-850
Font Point
Character Set Select the symbol or character set.
Table Print
Auto LF
Auto Mask
Left Margin
Right Margin
Top Margin
Bottom Margin Set the bottom margin distance from the bottom edge of the paper.
Lines
IBM Proprinter Font No.
Font Pitch
Font Point
Character Set Select the symbol or character set.
Table Print
Auto LF
Auto CR
Auto Mask
Left Margin
Right Margin
Top Margin
Bottom Margin Set the bottom margin distance from the bottom edge of the paper.
Lines
PS Error Print
[Settings] > [Network]
Level 2 Level 3
Wired LAN TCP/IP
Descriptions
The Font Pitch menu appears when you choose I012 to I018, I031 to
I037 or I097 to I109 in Font No. setting.
Set the font size.
The Font Point menu appears when you choose I000 to I011, I019 to
I030 or I038 to I096 in Font No. setting.
Print the code table.
ON: CR -> CR+LF, OFF: CR -> CR
Set the top and bottom margins to two-line each. When you set Auto Mask
to On, this setting overrides the Top Margin and Bottom Margin settings.
Set the left margin at column 0 to 70 columns at 1 cpi.
Set the right margin at column 10 to 80 columns at 1 cpi.
Set the top margin distance from the top edge of the paper.
Set the number of lines on each page.
Set the font number.
Set the font pitch.
The Font Pitch menu appears when you choose I012 to I018, I031 to
I037 or I097 to I109 in Font No. setting.
Set the font size.
The Font Point menu appears when you choose I000 to I011, I019 to
I030 or I038 to I096 in Font No. setting.
Print the code table.
ON: CR -> CR+LF, OFF: CR -> CR
ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Set the top and bottom margins to two-line each. When you set Auto Mask
to On, this setting overrides the Top Margin and Bottom Margin settings.
Set the left margin at column 0 to 70 columns at 1 cpi.
Set the right margin at column 10 to 80 columns at 1 cpi.
Set the top margin distance from the top edge of the paper.
Set the number of lines on each page.
Choose whether the machine prints the error information when errors occur.
Level 4 Level 5
Boot Method -
IP Address -
Subnet Mask -
Gateway -
Descriptions
Choose the IP method that best suits your
needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
280