Reducing And Enlarging In 1% Steps (Zoom) - Ricoh AD1 Reference Operation Manual

REDUCING AND ENLARGING IN 1% STEPS (Zoom)

REDUCING AND ENLARGING IN 1% STEPS
You can change the reproduction ra-
tio in 1% steps.
The following ratios can be selected:
Setting originals on the exposure glass:
Setting originals in the document feeder:
You can select a preset ratio which is near the desired ratio, and then adjust it
with the +Zoom Up or -Zoom Down key.
1
Specify the ratio with the
+Zoom Up or -Zoom Down
key. The specified ratio is dis-
played on screen.
When you press the +Zoom Up or -Zoom Down key once, the ratio is changed
in 1% steps. When you hold them down, the ratio is changed in 10% steps.
If you make a mistake, correct the ratio with the +Zoom Up or -Zoom Down key.
2
Set the original and then press the Start key.
25 - 400 %
37 - 150 %
Combine/ Double
Sorter Series Copies Copies
Positive/
Negative
Sort
Repeat
Erese Center/
Staple
Overlay Duplex
Border
(Zoom)
D.Size Mag.
(inch)
Zoom up
Auto Reduce/
Direct. Mag.
(%) Enlarge Zoom Down
27