Storing Your Copy Settings In Memory (Program); Storing/Changing The Program - Ricoh AD1 Reference Operation Manual

STORING YOUR COPY SETTINGS IN MEMORY (Program)

STORING YOUR COPY SETTINGS IN MEMORY
If there are certain combinations that you use frequently, you can store these
settings as a program. Each time you need to perform this job, you only need
to recall the program, saving time and trouble.
You can store up to two programs.
The size of copy paper can be memorized. Thus, if copy paper of the same size
is set, the upper tray is selected.
Programs are not cleared by turning the power off or by pressing the Clear Modes/
Energy Saver key. It is canceled when you overwrite them with another pro-
gram.
You cannot erase a program. To change a program, overwrite it with a new one.
⇒ See "Storing/Changing the Program."
You cannot register the number of copies.

Storing/Changing The Program

1
Set the copy settings you want
to store.
2
Press the Program key. The
program screen is displayed.
3
Press the [Store] key.
4
With the < and > keys, select
a program number. Then, press
the [OK] key.
When you finish, m is dis-
played.
The program number with m has al-
ready settings in it.
22
Program
(Program)
Clear Modes/
C
Energy Saver