Input/Output 2/2; Service Representative Settings - Ricoh AD1 Reference Operation Manual

SETTINGS YOU CAN CHANGE WITH THE USER TOOLS

SERVICE REPRESENTATIVE SETTINGS

For details on accessing the user tools, ⇒ see page 56.
Shaded items (

Input/Output 2/2

Description
5 Rotate Sort
· By default, the Rotate Sort is selected when
you use sorting function. You can cancel this
setting.
6 R. Srt. Auto Pap. Cont (Rotate Sort Auto
Paper Continue)
· In the Rotate Sort mode you can specify
whether or not to continue copying onto
available copy paper in the following cases:
· When K or L copy paper runs out dur-
ing copying.
· When copy paper identical in size but differ-
ent in direction is not set in the paper tray.
7 Sort Exit Priority (optional finisher is
required)
· You can select the tray that copies exit to
when using the sorting function with the
optional finisher. If you select "Finisher", the
Sort mode is selected when using the sort-
ing function. If you select "Output Trays",
the Rotate Sort or the Sort mode is selected.
(⇒ see "5 Rotate Sort".)
Some features can be adjusted by your service representative to suit your
needs. This section gives a brief description of these features. For more
information, contact your service representative.
A3, 11" x 17" Double Count
When you use A3, 11" x 17" paper, your service representative can set the
machine to count each A3, 11" x 17" as two copies.
Auto Paper Select Small Size Detection (for metric version)
Your service representative can sets the machine to detect the original size
on the exposure glass as A5 K whenever the machine cannot detect it with
Auto Paper Select.
64
) are selected as the default setting.

SERVICE REPRESENTATIVE SETTINGS

Procedure
Select "No" or " Yes " with the
< or > key.
Press the [OK] key.
Select " " or "Yes" with the
No
< or > key.
Press the [OK] key.
Select " Finisher
Trays" with the < or > key.
Press the [OK] key.
" or "Output