Recalling A Program; Other Functions; Temporarily Stopping One Job To Copy Something Else (Interrupt) - Ricoh AD1 Reference Operation Manual

When the program is already registered (Change)
Check the program and then decide whether or not to overwrite it.
⇒ To find out the stored settings, see "Recalling a Program."
To overwrite the program, press the [Yes] key.
To cancel your selection, press the [No] key and then select an unregistered
number.

Recalling A Program

1
Press the Program key. The
program screen is diplayed.
2
With the Number keys, enter
the number of the program to
be recalled. Then, press the
[OK] key. The registered set-
tings for the program are dis-
played.
A number without m does not have
settings in it.
3
Set the original and then press
the Start key.
Temporarily Stopping One Job To Copy
Something Else (Interrupt)
You can make urgently needed copies during a multi-copy run.
1
Press the Interrupt key. The key's indicator lights.
2
Remove the originals currently set for copying, and set your originals for
interrupt copying. Make your copies.
STORING YOUR COPY SETTINGS IN MEMORY (Program)

OTHER FUNCTIONS

OTHER FUNCTIONS

23