Panel Display For Sort/Rotate Sort - Ricoh AD1 Reference Operation Manual

You cannot copy from the bypass tray with this feature.
Originals of the following sizes can be used:
Without optional
memory unit
With optional
memory unit
· Two paper trays are required for the Rotate Sort. Put copy paper K and L of
the same size on the paper trays.
As a default, two paper trays identical in size but different in direction must be
available in Rotate Sort mode. You can change this setting. ⇒ See page 64.
The copying speed might be slower than that for normal copying. Also, it de-
pends on the type of original and the original type setting (Photo, Text/Photo, or
Text).
The number of originals that can be stored in memory depends on their type.
The memory capacity for originals with photographs is smaller than that for origi-
nals without.

Panel Display For Sort/Rotate Sort

You can set the panel display to indicate the number of originals fed through the
document feeder. ⇒ See page 63.
Example) Making two copy sets of each of three originals
Before copying: Q'ty: 2 ... Number of copy set you enter
During copying:
1 → 2 → 3 ... Number of scanned originals
Orig.
1 → 1 → 1 2 → 2→ 2 ... Number of copies
Copy
SORTING INTO SETS (123, 123, 123) (Sort/Rotate Sort)
Paper size
A4, B5, 8½" x 11"
B4, 8½" x 14", A3, 11" x 17"
A4, B5, 8½ x 11"
B4, 8½" x 14", A3, 11" x 17"
Sort Rotate Sort
17