Fujitsu PRIMERGY CX120 S1 Service Supplement Manual page 73

Ê Reinstall all components as shown in the related sections:
– Processors:
– Heat sinks:
– Memory modules:
– Expansion cards:
– PCI riser card:
– RMM3 module:
(RMM3)" on page 45
Ê Close the server as described in
I
After installing the new system board, check for available BIOS updates.
PRIMERGY CX120 S1
section "Installing a processor" on page 56
section "Installing a heat sink" on page 59
section "Installing a memory module" on page 63
section "Replacing expansion cards" on page 40
section "Replacing the PCI riser card" on page 44
section "Replacing the Remote Management Module
Service Supplement
Replacing the system board
section "Closing the server" on page 31.
71