Fujitsu PRIMERGY CX120 S1 Service Supplement Manual page 75

Ê Reinstall all components into the replacement chassis (S26361-K1348-
V900) as shown in the related sections:
– Processors:
– Heat sinks:
– Memory modules:
– Expansion cards:
– PCI riser card:
– RMM3 module:
(RMM3)" on page 45
– System board:
Ê Mount the server cover of the original chassis (including the defective PSU)
onto the replacement chassis as described in
on page 31.
I
Ensure that the type label on the server cover is in place:
PRIMERGY CX120 S1
section "Installing a processor" on page 56
section "Installing a heat sink" on page 59
section "Installing a memory module" on page 63
section "Replacing expansion cards" on page 40
section "Replacing the PCI riser card" on page 44
section "Replacing the Remote Management Module
section "Replacing the system board" on page 65
Service Supplement
Replacing the power supply unit
section "Closing the server"
73