Fujitsu PRIMERGY CX120 S1 Service Supplement Manual page 70

Replacing the system board
Figure 57: Installing the system board (A)
Ê Hold the replacement system board by the memory module ejectors and a
PCI riser slot.
V
CAUTION!
Do not lift or handle the system board by any of its heat sinks!
Ensure not to damage the EMI springs to comply with applicable
EMC regulations and satisfy cooling requirements and fire
protection measures.
Ê At a slight angle, insert the system board into the housing in the direction of
the arrow (1).
Ê Carefully shift the system board towards the server front until the plug shells
engage with the cut-outs in the connector panel (2).
68 Service Supplement
PRIMERGY CX120 S1