Closing The Server - Fujitsu PRIMERGY CX120 S1 Service Supplement Manual

4.1.4.2

Closing the server

Figure 15: Closing the server (A)
Ê Fit the four tabs on the server cover into the slots in the front upper edge of
the chassis (1).
Ê Carefully rotate the server cover in the direction of the arrow (2).
Figure 16: Closing the server (B)
Ê Secure the server cover with two screws on the server rear (M3 x 4.5 mm,
C26192-Y10-C67).
Ê Reinstall the server in the system unit as described in
PRIMERGY CX120 S1 server in the system unit" on page
PRIMERGY CX120 S1
Service Supplement
Preparations
section "Installing a
21.
31