Procedure - Fujitsu PRIMERGY CX120 S1 Service Supplement Manual

2

Procedure

V
CAUTION!
The actions described in these instructions should only be performed by
service personnel.
Ê First of all please familiarize yourself with the safety instructions in the
section chapter "Safety notes" on page
Ê Ensure that all required manuals (see Service DVD) are available, printing
out the PDF files if necessary. You will definitely need the Operating Manual
for the server and the Technical Manual for the system board.
Ê Shut down the server correctly, switch it off, remove it from the system unit,
and open the server as described in the
page 29.
Ê Replace the defective component as described in the associated chapter.
Ê Close the server as described in
Ê Reinstall the server in the system unit as described in
PRIMERGY CX120 S1 server in the system unit" on page
Ê Start the operating system as described in the operating manual.
PRIMERGY CX120 S1
11.
section "Opening the server" on
section "Closing the server" on page
Service Supplement
31.
section "Installing a
21.
9