Replacing The System Board - Fujitsu PRIMERGY CX120 S1 Service Supplement Manual

4.8

Replacing the system board

Ê Open the server as described in
Ê Remove all cables from the system board.
Ê Remove the following components from the system board as shown in the
related sections:
– Heat sinks:
– Processors:
– Memory modules:
– Expansion cards:
– PCI riser card:
– RMM3 module:
(RMM3)" on page 45
PRIMERGY CX120 S1
section "Removing a heat sink" on page 51
section "Removing a processor" on page 53
section "Removing a memory module" on page 63
section "Replacing expansion cards" on page 40
section "Replacing the PCI riser card" on page 44
section "Replacing the Remote Management Module
Service Supplement
Replacing the system board
System Board D3052
Part numbers:
S26361-D3052-A100
S26361-D3052-A101
section "Opening the server" on page 29.
65