Avaya S8500 Installing And Configuring page 51

2. Click Continue until you get to the "Specify how you want to use this Wizard" page.
3. Select Configure Individual Services and click Continue.
4. On the menu on the left, click Set Identities
5. Use the drop-down menus to assign the Ethernet port functions. The following table shows
the default assignments for three S8500 configurations:
Table 8: Recommended port assignments for S8500B and S8500C
Functionality
Control Network A
Services laptop computer
Internal SAMP
Control Network B —
ESS for S87xx system with
duplicated control
Corporate LAN —
Private control network
Corporate LAN —
Shared control network
1. These port assignments are recommended when using the Set Identities web page in the Maintenance
Web Interface. The settings entered on this web page might not correspond to the setting reported for
the CLI ifconfig command.
2. Ethernet 2 is internal to the S8500 Server and is not configurable.
Installing and Configuring the Avaya S8500 Server
S8500B with
dual NIC
Ethernet 0
Ethernet 1
Ethernet 2
Ethernet 3
Ethernet 4
Ethernet 0
Configuring the NIC
1
S8500B without S8500C
dual NIC
Ethernet 0 Ethernet 0
Ethernet 1 Ethernet 1
Ethernet 2 Ethernet 2
Unused Ethernet 3
NA Ethernet 4
Ethernet 0 Ethernet 0
January 2008
51