Avaya S8500 Installing And Configuring page 83

Figure 14: S8500B front panel
h2ms85bf KLC 091704
Figure notes:
1. CD-ROM drive activity LED
2. CD-ROM eject button
3. Diskette drive activity LED
4. Diskette eject button
5. System error LED
6. System locator LED
7. Hard disk drive activity LED
The functions of the front-panel LEDs are as follows:
Table 9: S8500 front-panel LEDs
LED
Power on
Hard disk drive
Locator
System error
CD-ROM drive
Floppy disk drive
(S8500B only)
Figure 15: Rear view of S8500B Server
panel of the S8500B. Each port connector has two LEDs, one for transmission activity and one
to indicate the transmission speed. The port LEDs on the S8500C are the same as on the
S8500B.
Installing and Configuring the Avaya S8500 Server
1 2
.
When lit and not flashing, the server is turned on. When
flashing, the server is turned off and still connected to the AC
power source. When off, AC power is not present, or the
power supply or the LED failed.
When on or blinking, indicates HDD activity.
Use this blue LED to locate the server if the server is in a
location with numerous other servers.
When on, indicates a system error.
When on or blinking, indicates activity on the CD-ROM drive.
When on or blinking, indicates activity on the FDD drive.
8. Power on LED
9. Power control button
10. Reset button —
and run the power-on self-test (POST).
11. USB connections for the compact flash drive.
Description
on page 84 shows the Ethernet port LEDs on the back
3 4 5 6
11 10
Press to reset the server
January 2008
S8500 LEDs
7
8
9
83