Avaya S8500 Installing And Configuring page 26

Chapter 1: Introduction
You can use SSH to access the following devices:
The S8300, S8400, S8500, and S8700-series Servers on Release 3.1 or later of
Communication Manager
Note:
With Release 4.0 or later of Communication Manager, Telnet is disabled, so you
Note:
must use SSH to access the servers after Communication Manager software
Release 4.0 or later is installed.
A Server Availability Management Processor (SAMP), which is used with the S8500
Server
A Maintenance Processor Complex (MPC), which is used with the S8400 Server
A TN2312BP IPSI that is running firmware version 20 or higher
A TN8412AP SIPI
A TN2602 IP Media Resource that is running firmware version 212 or higher
An Expanded Meet-Me Conferencing (EMMC) server
A SIP Enablement Services (SES) server
G250, G350, and G450 media gateways
C360 Ethernet switches
!
Important:
You cannot use SSH with the G700. From within the Linux command line of a
Important:
server, you can use SSH to access the G250, 350, and G450, but you must use
Telnet to access the G700.
26
Installing and Configuring the Avaya S8500 Server January 2008