Chapter 4: Server configuration
To set the date, time, and time zone:
1. From the Main Menu, under Server, click Server Date/Time.
2. In the Server Date/Time window, verify the date and time are correct. If the date and time
are incorrect:
a. Enter the date
b. Enter the time
c. Enter the time zone
d. Click Submit
!
!
WARNING:
If you set time zone, you must reboot the server.
WARNING:
e. Reboot the server:
1. Click Shutdown Server under the Server heading.
2. Select Delayed Shutdown and Restart server after shutdown.
3. Click Shutdown.
You will be logged off the server when it reboots. You can use ping to verify when the
server is accessible again.
Maintenance Web Pages configuration screens
The following table shows the web pages you may need to complete for manual server
configuration. For each server configuration (for example, main, LSP, or ESS), the table shows
whether that screen must be completed or not.
42
Installing and Configuring the Avaya S8500 Server
January 2008