Volvo XC90 Owner's Manual page 560

LOADING, STORAGE AND PASSENGER COMPARTMENT
||
3. Repeat step 2 above to secure the other
hook in the attachment point on the opposite
side.
WARNING
Make sure the cargo grid's hooks are securely
attached in the ceiling attachment points to
help ensure the grid does not come loose.
4.
Attach the mounting bracket's hook through
the cargo anchoring eyelet near the floor of
the cargo compartment and insert the threa-
ded section of the bracket through the grid's
lower attachment hole (1).
Slide the plastic sleeve onto the threaded
section of the mounting bracket with the
sleeve's flange turned upward and press it
down through the hole. Screw the screw
cover into place until its underside is approxi-
mately 5 mm from the grid (2).
558
5. Repeat step 4 for the opposite side.
6. Center the grid and then tighten both mount-
ing brackets, moving back and forth between
them until the grid is securely in place.
Removing the cover
Remove the steel grid by performing the above
steps in reverse order.
It can be a good idea to remove the mounting
brackets before removing the plastic sleeves
from the holes in the grid.
Related information
• Loading recommendations (p. 550)
• Load anchoring eyelets (p. 553)
Installing and removing the cargo
net*
The cargo net helps prevent objects in the cargo
compartment from entering the passenger com-
partment in the event of a sudden stop or hard
braking.
The cargo net is attached at four points.
For safety reasons, the cargo net must always be
mounted and secured according to the following
description.
The net is made of strong nylon weave and can
be attached in two different locations in the vehi-
cle:
• Rear mounting - behind the second row of
seats.
• Front mounting - behind the front seats.
* Option/accessory.