Volvo XC90 Owner's Manual page 422

STARTING AND DRIVING
Leveling control settings*
Turn off leveling control before lifting the vehicle
with a jack to help avoid problems with the
pneumatic suspension.
The vehicle can be lowered or raised to make it
easier to load or for passengers to get in and
out.
Adjusting loading mode
Use the buttons in the cargo compartment to
raise or lower the rear section of the vehicle to
facilitate loading or unloading the vehicle or con-
necting or disconnecting a trailer.
Center display settings
Easy Entry and Exit Suspension Control
The vehicle can be lowered to make it easier to
get in and out.
Activating easy entry in the center display:
420
Settings
1. Tap
in the Top view.
My Car Mirrors and
2. Tap
Easy Entry and Exit Suspension
3. Select
Control
.
> When the vehicle is parked and the
engine is turned off, the level is lowered.
(Level adjustment will stop if a side door
is opened and will resume after a slight
delay when the door has been closed.)
When the engine is started and the vehi-
cle begins to move, the level will be raised
to the height set by the selected drive
mode.
Disable Leveling Control
In certain situations, this function must be turned
off, e.g. before the vehicle is raised using a jack*.
The level difference caused by raising the vehicle
with a jack could cause problems with the pneu-
matic suspension.
Turning off the function in the center display:
Settings
1. Tap
in the Top view.
My Car Parking Brake and
2. Tap
Suspension.
Disable Leveling Control
3. Select
Related information
• Leveling control* and suspension (p. 417)
• Loading recommendations (p. 550)
Low Speed Control*
The low-speed function (LSC
Convenience.
improves control and traction on rough roads
and slippery surfaces, e.g. when towing a trailer
on grass or up boat ramps.
In vehicles equipped with drive mode control*,
the function is included in the
mode.
Low Speed Control is designed for driving on
rough roads and when towing trailers at low
speeds, up to approximately 40 km/h (25 mph).
When driving at low speeds, LSC prioritizes low
gears and all-wheel drive to help avoid wheel spin
and improve traction on all wheels. The accelera-
tor pedal will be less responsive to improve trac-
tion and speed control at low speeds.
The function is activated together with Hill
Descent Control (HDC
ble to control speed going down steep hills using
the accelerator pedal and reduces the need to
use the brake pedal. The system makes it possi-
ble to maintain a low and uniform speed when
driving down steep hills.
.
9
) facilitates and
Off Road
drive
10
), which makes it possi-
* Option/accessory.