Volvo XC90 Owner's Manual page 442

STARTING AND DRIVING
||
Front: Remove the cover by pressing on the
mark with a finger.
> The cover turns along its center line and
can then be removed.
Rear: Remove the cover by pressing on the
mark with a finger while folding out the
opposite side/corner.
> The cover turns along its center line and
can then be removed.
440
4. Screw the towing eyelet into place as far as
possible.
Fasten the eyelet securing by, for example,
inserting a lug wrench* through it and using
this as a lever.
CAUTION
It is important that the towing eye is screwed
in securely as far as possible.
To consider before using the towing eyelet
• In certain conditions, the towing eyelet may
be used to pull the vehicle onto a flatbed tow
truck. The vehicle's position and ground
clearance determines if this is possible.
• If the incline of the tow truck is too steep or
if the ground clearance under the vehicle is
insufficient, attempting to pull it up using the
towing eyelet may result in damage.
• If necessary, lift the vehicle using the tow
truck's lifting device instead of using the
towing eyelet.
WARNING
No person or object should be behind the tow
truck when the vehicle is lifted onto the bed
of the truck.
CAUTION
The towing eyelet is only intended for towing
on roads – not for pulling vehicles from
ditches or any similar purpose involving
severe strain. Call a tow truck for professional
assistance.
Removing the towing eyelet
Unscrew the towing eyelet after use and
–
return it to its storage location in the foam
block.
Replace the cover on the bumper.
Related information
• Towing using a towline (p. 438)
• Recovery (p. 441)
• Tool kit (p. 526)
* Option/accessory.