Volvo XC90 Owner's Manual page 293

Increases the time interval to the vehicle
ahead
Reduces the time interval to the vehicle
ahead
Target vehicle indicator: the function has
detected and is following a target vehicle
using the set time interval
Symbol for time interval to the vehicle ahead
Instrument panel
Speed indicators.
Set speed.
Speed of the vehicle ahead.
The current speed of your vehicle.
Related information
•
Adaptive Cruise Control* (p. 289)
Activating and starting Adaptive
Cruise Control*
24
Adaptive Cruise Control (ACC
activated and then started before it can regulate
speed and distance.
Putting Adaptive Cruise Control in
standby mode
Adaptive Cruise Control is in standby mode each
time the engine is started. To put ACC in standby
mode from active mode:
Press ◀ (2) or ▶ (3) on the steering wheel
–
keypad and scroll to the
> The symbol will appear and Adaptive
Cruise Control will go into standby mode.
Starting/activating Adaptive Cruise
Control
To start ACC:
) must first be
• The driver's seat belt must be buckled and
the driver's door must be closed.
• There must be a vehicle ahead (target vehi-
cle) within a reasonable distance or your
vehicle's current speed must be at least
15 km/h (9 mph).
With the
–
(1) on the steering wheel keypad.
> Adaptive Cruise Control will start and the
(4) function.
current speed will be stored, which will be
shown by numbers in the center of the
speedometer.
DRIVER SUPPORT
(4) function displayed, press
* Option/accessory.
}}
291