DRIVER SUPPORT
||
WARNING
•
This is not a collision avoidance system.
The driver is always responsible and must
intervene if the system fails to detect a
vehicle ahead.
•
The function does not brake for people or
animals and does not brake for small
vehicles, such as bikes and motorcycles.
Similarly, it does not brake for low trailers,
oncoming, slow-moving or stationary vehi-
cles and objects.
•
Do not use the function in demanding sit-
uations, such as in city traffic, at intersec-
tions, on slippery surfaces, with a lot of
water or slush on the road, in heavy rain/
snow, in poor visibility, on winding roads,
or on on/off ramps.
CAUTION
Maintenance of driver support components
may only performed by a workshop
Related information
•
Driver support systems (p. 276)
•
Adaptive Cruise Control* controls and dis-
plays (p. 290)
An authorized Volvo workshop is recommended.
23
290
•
Activating and starting Adaptive Cruise Con-
trol* (p. 291)
•
Adaptive Cruise Control* limitations (p. 294)
•
Symbols and messages for Adaptive Cruise
Control* (p. 296)
•
Collision risk warning from driver support
(p. 307)
•
Set time interval for driver support (p. 309)
•
Adjusting set speed for driver support
(p. 310)
•
Auto-hold braking with driver support
(p. 311)
•
Switching target vehicles with driver support
(p. 308)
•
Passing assistance (p. 312)
23
.
Adaptive Cruise Control* controls
and displays
A summary of how Adaptive Cruise Control is
controlled using the right-side steering wheel
keypad and how the function is shown in the dis-
play.
: From standby mode - activates and
sets the current speed
: From active mode - deactivates/puts
in standby mode
: Activates the function from standby
mode and resumes the set speed
: Increases the set speed
: Reduces the set speed
* Option/accessory.