Volvo XC90 Owner's Manual page 163

The function is only active in weak daylight or
dark conditions and only when the vehicle is mov-
ing and the low beams are on.
Deactivating/activating the function
The function is activated as the default factory
setting and can be activated and deactivated in
the center display's Function view:
Active Bending
Tap the
Lights
button.
Related information
• Adjusting light functions via the center dis-
play (p. 155)
•
Front fog lights/cornering illumination*
(p. 161)
Front fog lights/cornering
illumination*
The front fog lights have a stronger beam than
low beam, making them particularly effective in
fog.
Front fog lights button.
The front fog lights can be turned on when the
ignition is in mode II and the lighting ring is in
position , or .
Tap the button to activate or deactivate the func-
tion. The symbol in the instrument panel
comes on when the front fog lights are on.
The front fog lights turn off automatically when
the ignition is switched off or when the lighting
ring is in position .
NOTE
Regulations concerning fog light use vary
from country to country.
Cornering illumination*
The front fog lamps can include the cornering
lights function, which temporarily illuminates the
area diagonally in front of the car in the direction
the steering wheel is turned on a sharp bend, or
in the direction shown by the direction indicators.
The function is activated in weak daylight or dark
conditions when the lighting ring is in
mode and the vehicle speed is less than
about 30 km/h (about 20 mph).
Both cornering illumination are also illuminated
as a complement to the taillights when reversing.
The function is activated as the default factory
setting and can be activated and deactivated
using the center display.
Related information
• Lighting control and panel (p. 154)
• Ignition modes (p. 392)
• Rear fog light (p. 162)
•
Active Bending Lights* (p. 160)
• Adjusting light functions via the center dis-
play (p. 155)
LIGHTING
or
161
* Option/accessory.