Volvo XC90 Owner's Manual page 151

Hide thumbs Also See for XC90:
Table of Contents

Advertisement

Commands for specific functions, such as phone
and audio, are described in the sections related
to that function.
Numbers
Number commands can be given in different
ways depending on the function to be controlled:
Phone numbers and zip codes should be
given by stating each number individually, e.g.
zero three one two two four four three
(03122443).
Addresses can be given by stating each
number individually or in a group, e.g. two two
or twenty-two (22). For English and Dutch
language settings, groups of numbers can
also be said in sequence, e.g. twenty-two
twenty-two (22 22). For English, double or
triple digits can also be used, e.g. double
zero (00). Numbers in the range 0-2300 can
be used.
Frequencies can be given as ninety-eight
point eight (98.8), one hundred four point
two, or hundred four point two (104.2).
Speech rate and repeat mode
The speed at which the voice commands are
given can be adjusted.
With repeat mode on, the system will repeat what
you have said.
To change the speech rate or activate/deactivate
repeat mode:
Settings
1. Tap
in the Top view.
System
Voice Control
2. Tap
settings.
Repeat Voice Command
Speech Rate
Related information
Voice control (p. 147)
Voice control for cellular phones (p. 149)
Voice control for radio and media (p. 150)
Climate control system voice commands
(p. 208)
Voice control settings (p. 151)
Voice control for cellular phones
Call a contact in the phone book, have a text
and select
message read aloud or dictate short messages
using voice commands to a Bluetooth-con-
nected phone.
To access a contact in the phone book, the voice
command must contain the contact information
entered in the phone book. If a contact, e.g.
Robyn Smith
in the phone book, a number category such as
home
cellular
or
Robyn Smith cellular
Tap
and say one of the following commands:
Call [contact]
"
from the phone book.
Call [phone number]
"
ber.
Recent calls
"
calls.
Read message
"
aloud. If there are several messages, select
the message to read aloud.
Message to [contact]
"
prompted to dictate a short message. The
message will then be read aloud and the
user can choose to send
message. The vehicle must be connected to
the Internet to access this function.
DISPLAYS AND VOICE CONTROL
21
, has several phone numbers listed
Call
can also be specified, i.e. "
".
" - call the selected contact
" - call a phone num-
" - display the list of recent
" - read a text message
" - the user is
22
or re-dictate the
}}
149

Advertisement

Table of Contents
loading

Table of Contents