Internet And Network Settings - Pitney Bowes Connect+ Series Operator's Manual

System Setup

Internet and network settings

The Internet and Network settings allow you to:
View the IntelliLink® connection parameters for your postage account.
l
Reset the factory settings (if necessary).
l
View the inserter communications settings.
l
Initiate Remote Assistance when instructed by a Pitney Bowes service representative.
l
Perform a network connectivity test to ensure your Connect+® Series / SendPro® P-Series
l
system can connect successfully to the Pitney Bowes infrastructure.
To access these options, select the Settings button in the Mailing tile on the Home screen and then
select Internet & Network.
Viewing and exporting communication settings
This option allows you to view the communication settings for your system and export them to a USB
drive. The communication settings are viewed within the Settings application.
1. Select the Settings button in the Mailing tile on the Home screen.
2. Select Internet & Network from the list on the left side of the screen.
3. Select Communication Settings. The IP address, Synchronous port, Asynchronous port, Host
name, Machine ID, and Machine password for the system are displayed. These fields are
automatically populated by Pitney Bowes.
If it is necessary for you to export the communications settings, insert a USB drive into an available port
on the mailing system.
1. Select Export settings to USB drive....
2. Select the File name field.
a. Type in the file name.
b. Select OK.
Pitney Bowes Operator Guide February, 2018 Page 220 of 349